Can you brush latex paint directly after wallpaper is torn off？

It's OK.

After the wallpaper is torn off, you can directly brush the latex paint, but to the wall for a simple treatment, especially when there is some glue to tear off the wallpaper, we must remove clean, to ensure that the surface is smooth, dust-free, smooth, no concave and convex, you can brush the latex paint. The reason why the wallpaper can be directly brushed latex paint is that the processing process of the wall is the same before the wallpaper is torn and the latex paint is brushed, which requires scraping putty, grinding and other construction.

Method of changing wallpaper latex paint
1, if you are ready to renovate the wall, you need to remove the original wallpaper on the wall, so as not to have an impact on the later brush latex paint. If the wallpaper can not be cleared, it is easy to lead to the wall bubbling or out of the phenomenon, but some very firm sticky areas, you can also not tear.

2. After the wallpaper on the wall is removed, it is necessary to use putty powder for leveling. Under normal circumstances, putty is scraped twice. Of course, if the wall flatness is not bad, then after scraping again putty, you can use sandpaper sanding, and then scraping putty for a second time.

3. After the wall is leveled, it can begin to scrape the white. Generally speaking, it also needs to scrape twice.

4, after all the preparatory work is done, you can start to brush the latex paint. In general, it is necessary to brush both sides, and the second time needs to wait until the first time after dry construction, to ensure that the later can be used normally.